Automatic 3 in 1 Beer Bottling Equipment for Small Glass Bottle and Crown Cap

Automatic 3 in 1 Beer Bottling Equipment for Small Glass Bottle and Crown Cap

CZPT three in one Beer Bottling CZPT for Little Glass CZPT and Crown Cap
 

Product Description

1. Introduction
This beer filling machine is my company’s introduction of German technological innovation, combined with the characteristics of beer production market, created to create little-scale beer filling products. The device has outstanding mechanical procedure trustworthiness, enhanced rinsing, filling, include screwing, disinfection sterilization and other features.
two. Structural Characteristics
1) The rinsing device employing high-toughness stainless steel bottles of spring-loaded folders, to make certain a stable reversal of the glass bottles. The nozzle is a plum-like composition can clean each corner of the sidewall and base to make the bottle cleanse.
two) Filling equipment with spring-variety mechanical lifting products to upgrade glass bottles, large bearing assistance floundering in the vat and use of manual-rod in the orientation of the composition, there are pre-protect features. 
3) Using high-precision mechanical filling valve, with cylinder liquid degree and the again stress controlled by a variable sign proportional. CZPT, stable, precise, to be vacuum 1 at a time.
four) CZPT steel plunger and mechanical stirring gland-kind magnetic sensible cap to make certain that the gland is healthier and reputable. Hopper and the cap getting- protect, capping transmitted by magnetic. The capping is reputable and computerized unloading, minimizing the charge of damaged bottles.
five) Before the capping, use hot h2o bubble established to displace bottlenecks air, making certain the oxygen content of considerably less than .15mg / L.
six) Filling devices involves broken bottle automatically stopping valve, damaged bottle washing, and foam immediately exhausting system. 
seven) With excellent CIP cleansing perform, and able of rinsing filling pipes with acid, lye liquid and scorching water.
eight) All the supplies in make contact with with the valves, tanks, pipes are produced of stainless steel 304 materials, inside of and exterior the wall of mirror-polished, ensuring it is healthy.
9) Manually dry oil lubrication program to make confident gear routine maintenance is much more convenient. 
ten) The total procedure adopts innovative male-device interface, PLC control, frequency conversion stepless speed regulation and other automatic handle technology, with no bottle no open valves, no stamps no cap no operation, and other stability safety.
three. Primary technological parameters
Washing heads:       14      (diameter:φ595)
Filling valve heads:    12      (diameter:φ510)
Capping heads:        4      (diameter:φ170)
CZPT measurement: 330-2000ml
Capability: 1500 bottle for every hour(330 ml), 1000 bottle for every hour(600 ml)
Relevant bottle:bottle peak two hundred~350mm
Diameter Φ52~Φ84mm
Aseptic air usage: 0.4mthree/min(.4~.6Mpa)
COconsumption:     150g/100L
h2o consumption including:
vacuum pump:.15m³/h
blowing: 0.6m³/h
Operating voltage :AC     220V 60HZ
Managing voltage :DC    24V
Power :        
Main motor       2.2 KW
Hopper motor     0 .18KW
Vacuum motor    0.75 KW
Spray pump      0.55KW   
CZPTtric chain motor :   0.75KW  
Total dimension : 2000×1800×2300(L×W×H)
Weight:2500KG
4. Main electrical component 
1) Touch Display screen: Mitsubishi,Japan 
2)PLC controller,CZPTs :Mitsubishi,Japan
three)Proximity switches, contactors, circuit breakers : Japan’s Omron, Siemens
four)Cylinder, solenoid valve :AIRTAC,ZheJiang              

 

Automatic 3 in 1 Beer Bottling Equipment for Small Glass Bottle and Crown Cap