OEM PU Surfboard High Quality Surf Board

OEM PU Surfboard High Quality Surf Board

Take a look at your expertise and make your own waves!


The Flying DRAGON electric powered jet surfboard is the excellent decision for energetic drinking water lovers who want to get pleasure from the feeling of gliding throughout flat waters or carving via modest waves.

People Adore the thought of standing up on a surfboard traveling across the h2o at up to 60kph, without a wave in sight!

With the electrical surfboard you will immerse yourself into a totally new and unbelievable perception of liberty. Tides and wind situations continue being dependencies of the past – now it truly is all up to you!

With a sandwich building and CNC shaped EPS main human body, challenging jet turbine and simple-to-change jet nozzle and impeller, the tremendous surfboard will give you hundreds of headache-totally free enjoyable.

 The Traveling DRAGON is effortless to store, transport, carry and start at your closest lake, river or seashore.

And it truly is straightforward to experience, too! We have observed riders get up on the board in two minutes, without having Ever obtaining ridden a surfboard before! Don’t get us improper, you’re heading to get soaked! But which is all component of the fun :

Jet Driven Surf Board

surfboard is an elongated system used in surfing. Surfboards are relatively mild, but are powerful ample to support an specific standing on them even though riding an ocean wave. They ended up invented in ancient Hawaii, exactly where they have been recognized as papa he’e nalu in the Hawaiian language, they ended up usually manufactured of wood from regional trees, such as koa, and were usually over fifteen ft (5 m) in size and really large.[1][2] Major advances more than the a long time consist of the addition of 1 or more fins (skegs) on the bottom rear of the board to improve directional balance, and many enhancements in components and form.

CZPT surfboards are made of polyurethane or polystyrene foam lined with levels of fiberglass cloth, and polyester or epoxy resin. The outcome is a mild and robust surfboard that is buoyant and maneuverable. The CZPTstyrene surfboard was invented by Reginald Sainsbury of Wilcove, Torpoint in the early 1960s while operating for the Poron Insulation firm, Millbrook, Cornwall who had been searching to broaden into the leisure market. Recent developments in surfboard technologies have included the use of carbon fiber and kevlar composites, as nicely as experimentation in biodegradable and ecologically friendly resins produced from natural resources.[three] Each yr, approximately 400,000 surfboards are made.


CZPTurethane (P.U.) boards

Surfboards have historically been constructed using polyurethane foam and it stays a well-known choice. They are created more powerful with 1 or a lot more stringers going down the middle of the board. The foam is molded into a “blank”, in the tough condition of a surfboard.[19] Once the blanks have been created they are given to shapers. Shapers then minimize, plane, and sand the board to its requirements. Last but not least, the board is coated in a single or more levels of fiberglass cloth and resin. It is for the duration of this phase that the fins or containers for removable fins are connected and the leash plug mounted. An additional strategy of making boards is making use of epoxy resin and prolapse polystyrene foam, as an alternative of polyester resin and polyurethane foam. In recent many years, surfboards made out of balsa and a polystyrene core are getting to be more well-known. Even strong balsa surfboards are available.

Although foam boards are generally shaped by hand, the use of devices to form them has grow to be more and more well-liked. Vacuum forming and present day sandwich design tactics borrowed from other industries have also turn out to be widespread. A lot of surfers have switched to using sandwich-development epoxy boards which have turn out to be specially common with beginner surfers as they provide a resilient, low-cost, entry-degree board.

Balsa boards

The Ochroma pyramidale wood’s surfboard heritage originates in the Hawaiians, and the wooden direct surfing’s landfall on the US west coastline in the forties. Becoming light-weight and strong, balsa wooden was lengthy deemed a best material for surfboards. Shapers could not use this fragile wood to make whole surfboards until after WWII, when fiberglass skins have been invented.

Balsa wood boards are lighter, far more buoyant and simpler to handle than other boards. These boards have some down sides, even so: they are not as strong as sound redwood boards.

Hollow picket boards

Hollow picket surfboards are created of wooden and epoxy or oil (as a sustainable option to epoxy), and are a reversion to making use of wooden right after the foam turned dominant in the 1950s. Hollow wood surfboards especially have no foam in their building. (Boards made with foam and wood are commonly identified as compsands or veneer boards.) Different design techniques are employed to hollow the inside of of the surfboard and lighten the bodyweight of the concluded board. CZPTly, a hollow wood surfboard is 30% to three hundred% heavier than a CZPT foam and resin surfboard. The main inspiration, aside from attractiveness, is that this is a more environmentally helpful approach of building (when compared to epoxy and polyurethane strategies) which uses quick-increasing plantation wooden these kinds of as paulownia, cedar, spruce, redwood, and, of program, balsa.

The recent development strategies descend from the 1930s Tom Blake paddleboarding method, which favors a central stringer with independently shaped transverse ribs covered with a pores and skin and rails. A modern day interpretation of Tom Blake’s function is the perimeter stringer method utilized by some companies, utilizing laminated rails as stringers connected with a sequence of plywood ribs. This skeleton is then sheathed with 5mm-thick wooden strips, producing a fast hollow board with excellent flex homes.

The parallel profile system was designed from cold molded (double diagonal) boat constructing, and uses at minimum 4 levels of materials laminated more than a male mold into a curved blank, like enough wood for rails, which are then shaped.

The chambering technique follows a system in which planks of paulownia wood are picked and the rocker of the board is lower into every. The planks are then chambered to reduce bodyweight, and then bonded jointly to sort a hollow or “chambered” blank.

CUSH – skinned surfboards

One of the most current modern day improvements in surfboard technology is the development of higher overall performance boards which are wrapped in a stretchable soft pores and skin which does not soak up water. The interior construction of Cush (cushion) boards is an epoxy surfboard with an EPS (extruded polystyrene) formed foam main. The “pores and skin”, made of a gloss coated foam, is stretched and adhered although vacuumed over the surface of the entire epoxy surfboard. The purpose of the cush is for dampening of chatter, absorption of affect landings, airs, grip, and total added defense for a mild epoxy board. Jim Richardson, twenty five-12 months veteran shaper on the North Shore of Oahu, 1st pioneered this engineering in the mid nineteen nineties. And not too long ago a handful of company’s which includes Spacestick, Radiowake and CUSH (brand) have begun to market place the improvements to the surfing neighborhood. Silencer surfboards is the present producer for the various manufacturers as of 2018.

CZPT Sandwich CZPT

The CZPT Sandwich type of board building became common amongst garage shapers and later on, key producers, for the duration of the nineteen nineties and 2000s. This construction approach entails hand- or machine-shaping a foam blank from EPS foam and then vacuum-bagging or hand-laminating a more dense layer of foam, wooden, or carbon on to the bottom and deck of the EPS foam core, generally separating the two levels with lightweight fiberglass cloth (2 oz) or other composites cloths. This can also be accompanied with parabolic rails produced of balsa or other buoyant woods, carbon, or other high-density supplies. This blank design is then laminated with epoxy resin and fiberglass or other composite cloth as any other surfboard would be, by hand or by means of vacuum bag.

The construction is referred to as a sandwich as it is composed of the best skin, fiberglass or other composite cloth, the EPS main, fiberglass or other composite cloth, and the bottom pores and skin, the cross area of which appears as a sandwich with the distinct levels. Firewire Surfboards pioneered this technologies for the mass-produced surfboard industry commencing in 2006.


Solution product CZPTtric Surfboard
Driving type Jet pump
Electrical power 11HP
CZPTery capacity 2.4-three.2KWH
CZPTery volt 48-82V
Surfboard material CZPT fiber composite board
Max pace 32knots/50kph
Max load(rider bodyweight) 130KG
Acceleration -45kph in four CZPTs
Managing time  1 hour of mixed driving
Exchangable battery Yes
CZPTery charging time 1.5 hours(rapidly)/four several hours(gradual)
CZPTery internet excess weight 15KG/23KG
Board web bodyweight 26KG(without battery)
Gross bodyweight(board&battery) 45KG
Toes straps attainable if order requested
CZPTery dimension 360*280*120mm
CZPTery deal dimension 650*430*260mm
Board dimension 1800*600*150mm
Surfboard package dimension 2000*750*280mm
  • 8kW CZPTtric Surfboard
  • CZPTium battery in custom watertight enclosure
  • CZPT battery charger
  • Feet straps
  • Owner’s manuals
  • Trip in lake,river,seaside


Basic safety

You should use your Dragon in accordance with all applicable regional legal guidelines, principles and restrictions, which could contain registration and licensing.

Please ensure that you comply with the simple use and upkeep guidelines in the User’s guide. Failure to correctly sustain your tools could end result in hurt and void your guarantee.


Bodyweight Limit

Although the Traveling SURFBOARD has ample buoyancy to carry a rider in excess of 110kg, the opinions we have from our customers is that the encounter degrades when the weight of the rider is in the area of 85kg+.

The ideal excess weight for a rider is 80kg or underneath.

But will not despair!  If you are above 110kg, WE ARE Design and style NEW MCZPTL OF SURFBOARD – two times the electricity and can take a 140kg rider at about 55kph!  waiting for our up to date news before long.


Rental Use

    Fantastic idea! We have some wonderful rental options on offer, subject matter to availability, for a reduced daily fee (much less than the price tag of one rental), we are making this sort of policy,will get out before long.

    Welcome to inquiry us for more information.

    OEM PU Surfboard High Quality Surf Board