Pet Bottles Processing Recycling Clean Machine Washing Plant in Factory with 500kg H

Pet Bottles Processing Recycling Clean Machine Washing Plant in Factory with 500kg H


PET bottles processing recycling thoroughly clean machine/washing plant in manufacturing facility with 500kg/h. The device with High-torque twin-screw extruding screw unit, this  is a new-technology higher-speed, large-torque and higher-power twin screw extruder realizing technological marketing based mostly on the present item by drawing experience from the sophisticated manufacturing technology in China.


The advantages of this equipment
one. Highly efficent: the equipment is computerized and with significantly less power use.
2. Specific screw design: We will layout the screw up to client different material and the materials of screw and barrel can be 38CrMoAL or bimetallic.
3. This machine can have out perfect viscosity of PET without having difficult precystallization dryer technique. Only a little bit IV will be decreased. It can boost IV in the problem of introducing some suited additive.
5. The machine wih extended lifestyle.

other type of these kinds of device









CZPT diameter(mm)





sixty two.four



Rotary speed(rpm)



four hundred/600

five hundred/600

400/five hundred

four hundred/500

four hundred/500

Main motor electricity(kw)




37/forty five

55/seventy five

ninety/a hundred and ten





32-forty eight


32-forty eight

32-forty eight







one hundred-300

three hundred-600


Structure of the device

A lot more information device photoes
Crystallization dryer: dryer the PET flakes in advance
Vulume: 1000L.
Heater electricity: 36kW
Heat way: by electric powered
Blower energy : 4kW
Mixer energy: 2.2kW
Mixer shaft: SS304
Materials: Inside stainless metal, outdoors A3, With heat insulation layer.
With the open up door on the hopper, it will be simply run.

Solitary screw feeder  For feeding the flakes into the extruder:
Feed the PET flakes into the extruder, solitary screw feeder, feeding the material equally and stably.
Horizontal screw parameter:
CZPT diameter:φ60
Material of hopper: SS304
There is sight glass on the hopper, employee can be see the content in the hopper
Twin screw extruder device
Barrel variety: 10
Size of barrel #1-ten is 234mm
Overall size of barrels: ~2340mm
Barrel #one-9 manufactured of 38CrMoAl material, Hardened to ≥61HRC
The barrel area are cooled with h2o, every single barrel adopts single throttle and solenoid valve, and solenoid valve imported from Italy.
Barrel#1 open up for feeder, Barrel#four: open up barrel, for natural degassing, Barrel#6, Barrel#sixty eight: open up barrel, for vacuum degassing. The other folks is shut.
The processing area is provided with stainless metal cover as a protection towards.
Diameter :62.four mm L/D: 36:1
Centre length: 52mm
Material of screw: W6Mo5Cr4V2
CZPT velocity (counter rotating): 400RPM
A pair of screw shafts, comprehensive with screw factors, screw shafts  substance is 40CrNiMo, Hardened to ≥61HRC

The material occur out from the die(pull entice like noodles pelletizing way, PET have to use this pelletizing way. And the its need excellent vacuum, like roots pump, then the pellets will be considerably far better)

CZPT for the screw( drinking water managed by electrical valves)

CZPT factors of the device

Vacuum, we can use Roots vacuum or Bipolar pump.

Degassing on the extruder

Drinking water tank
Material occur from the die and go into the water tank for cooling, There is rubber roller in the tank, material strap can be ship into gale dryer to blower the drinking water on its floor.
Length of tank : 4m,
Materials of tank is SS304, Substance of bracket :Q235
It Can be moved up and down, forward and again up to the die and materials essential.
Electricity of blower on gale dryer:two.2kW

A. Portal shaped sort pelletizer,horniness alloy rotary cutter
B. capacity:300kg/hr
C. motor electrical power:4KW
D. Cutter diameter: 300mm
E. Blade width: 20mm
F. Traction speed :thirty-90m/min
G. No. of cutter gears: 32
H. Max quantity of traces: less than sixty

Closing pellets and Raw content

If you require  more particulars of this sort of equipment kindly contact me, I can send out you much more detail photoes and  vedios.

one. We provide underneath required documents with the machine:

  1. CZPT layout
  2. CZPTtricity diagram
  3. CZPT certification
  4. CZPT handbook ebook/servicing ebook

2. We supplies a single-12 months good quality guarantee. For the duration of this time period, if the machine’s malfunction is approved to be our responsibility, we will ship the broken spare components to you with DHL courier or other way inside of seven workdays right after obtaining the complainant. And ship the experts to the buyer’s manufacturing facility for sustaining. All costs are in our account.

3. Following one particular calendar year assure, If you want we can provides payable spare components and technician’s Going to servicing, and any damaged spares we can send out you before long as feasible.

four. We trust that our quotation satisfies with your requirements and we will gladly furnish you with further data.

five. 24Hours services :  Cell-139157 0571 8

Pet Bottles Processing Recycling Clean Machine Washing Plant in Factory with 500kg H