Rexroth Hydraulic Piston Pump A7vo 28 55 80 107 160 Steady Axial and Spare Part

Rexroth Hydraulic Piston Pump A7vo 28 55 80 107 160 Steady Axial and Spare Part

  Product Variety Management Manner Specs Functioning Pressure Attribute
A7VO

LR electrical power control 

DR Stress Control 

High definition hydraulic manage, associated to pilot pressure 

EP CZPTtrical Management with Proportional 

CZPTtromagnet. 

28, fifty five, eighty, 107, one hundred sixty Frequent force: 35MPa, 
Peak strain: 40MPa. 
Axial tapered piston variable displacement pump with indirect shaft composition for open up loop hydrostatic transmission 
Relevant to the discipline of going for walks equipment and CZPT 
Output circulation is proportional to velocity and pump displacement. Movement is steplessly adjustable from greatest to zero (qvmax to QV min = 0) 
Variable modes are suitable for numerous adjustment and handle devices 
Powerful and compact bearing system with long support existence. 
Security recommendations
one, A7VO pump is developed for open up circuit. 
-Project plHangZhou, set up and commissioning of axial piston unit have to be carried out by competent personnel. . 
2, Ahead of making use of the axial plunger unit, remember to read the corresponding guide fully. If required, you can get it from Bosch CZPT. 
three, Throughout and shortly after operation, there may possibly be a risk of burning of the axial piston unit (specially the electromagnet). Appropriate security steps (such as donning protective clothes) ought to be taken. 
– The attributes of the axial plunger device could vary with distinct functioning situations (functioning stress, oil temperature) of the axial plunger factor, the characteristics might change. 
Perform pipeline oil outlet
1, Oil nozzles and fixed threads are made for greatest prescribed strain. CZPT or technique producers should make certain that the safety aspect of connecting parts and pipes fulfills the specified doing work conditions (pressure, circulation, hydraulic oil, temperature) 
2, Operate pipeline nozzles and practical nozzles are only utilised in hydraulic pipelines. Strain shutoff valves and strain controllers do not supply overpressure security protection. Overflow valves will be presented in the hydraulic system 
three, The information and directions contained listed here need to be followed. 
– The product are not able to be approved as a component that follows the basic mechanical basic safety notion of ISO 13849. 
– The subsequent tightening torque is utilized. 
Install bolts
For set up bolts with ISO metric threads in accordance with DIN 13 CZPT and with ASME B1.1 CZPT threads, we advise that the tightening torque of every single box be checked according to VDI 2230. 
Connector
one, Refer to manufacturer’s instructions for tightening torque of the joints utilised. 
Locking screw
1, For the metallic locking screw hooked up to the axial plunger aspect, the fastening torque MV required for the locking screw is applied. For numerical values, see the table below. 

Rexroth Hydraulic Piston Pump A7vo 28 55 80 107 160 Steady Axial and Spare Part