Sk-0.15 Direct Water Ring Vacuum Pump

Sk-0.15 Direct Water Ring Vacuum Pump

SK sequence water ring vacuum pumps and compressors are utilized to pump or compress air and other non-corrosive, h2o-insoluble, strong particles-free gases to generate vacuum and stress in a shut container. liquid. SK direct drinking water ring vacuum pumps and compressors are broadly employed in equipment, petrochemical, pharmaceutical, meals, sugar business and electronics. Since the compression method of the gas is isothermal in the course of the working approach, it is less susceptible to danger when compressing and pumping the explosive gas, so its application is more comprehensive.

Observe: The values in the table are attained below the pursuing problems: one water temperature 15 ° C 2 air 20 ° C three gasoline relative temperature 70%

As shown in (1), the impeller is eccentrically mounted in the pump entire body. When the pump is started out, a particular top of drinking water is injected into the pump. When the impeller rotates, the water is subjected to centrifugal drive to form a rotating h2o ring on the interior wall of the pump body. When the inner surface of the lower part of the drinking water ring is tangent to the hub and rotates in the path of the arrow, the interior area of the water ring is slowly separated from the hub in the course of the initial fifty percent turn, so that a place is formed in between the blades and steadily enlarged, and the inner strain is lower than the pressure at the inlet. Inhale gasoline. Throughout the CZPT half switch, the internal floor of the drinking water ring progressively techniques the hub, and the area among the blades is diminished, and the gas strain is discharged when it is increased than the atmospheric pressure. When the impeller is operated continuously, the pump continually attracts gasoline.

Because drinking water will heat up with the continuation of operating time during the operating approach, some h2o will be discharged together with the gasoline. Consequently, cold drinking water must be continually equipped to the pump during the work to cool and replenish the drinking water eaten in the pump.
 

  (m3/min) 450mmHg
(m3/min)
(mmHg) (R.P.m) (kw) (L/min)
SK-.15 .fifteen .12 670 2850 .fifty five three~five
SK-.4 .four .36 seven hundred 2850 one.five 4~five
SK-.8 .8 .75 seven hundred 2860 two.two 5~10
SK-1.5A one.5 one.35 seven hundred 2860 3 8~12

Sk-0.15 Direct Water Ring Vacuum Pump