Lime Mud Small Solids Soft Particles Handling Slurry Pump

Lime Mud Small Solids Soft Particles Handling Slurry Pump

Introduction: 
1. HS series slurry pump is created for the continuous pumping of higher abrasive, higher density slurries with nominal upkeep requirements. The putting on areas are created of extremely chrome or and rubber. It will maintain higher performance over the use daily life of its elements. 

2. The metallic moist components and rubber kinds can be interchangeable for dealing with different liquids or slurries.

three. HS slurry pumps are offered in dimensions ranging from one inch to 18 inch discharge and function large efficiency efficiency capable of flow rates from ten.eight to 5400 m³/h and heads up to a hundred twenty five meters for large head designs. 

Characteristics:
1. Cylindrical framework of bearing assembly: hassle-free to modify the space among impeller and entrance liner
and can beremoved fully
two. Interchangeable anti-abrasive soaked elements produced of higher-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs offer large functioning force capabilities
and an further evaluate of security.
4. The discharge branch can be oriented to any eight positions at the interval of 45 degrees
five. Various drive types: DC(immediate link), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR manage, and so on
six. The shaft seal employs the packing seal, expeller seal and mechanical seal

Standard Software:

• CZPT processing • CZPT • Coal Washery • Cyclone feeds
Bentonite • CZPT slurry • Tailing • Mill grinding
• Ash handing • Tunnel • Waste sludge • Coarse sand
• Lime mud • Phosphoric acid • Dredging • CZPT
• Alumina CZPT • Power Plant • Potash Fertilizer Plant • Other industries
Iron ore sand Copper Focus Gold mine Molybdenum

Product Max Power
(Kw)
Inlet & Outlet dimensions (inch) Materials for Put on Components Circulation Rate (Q) Head
(H)
meter
Velocity
(RPM)
Impeller Dia.
(mm)
m³/hr l/s
25HS-B fifteen 1.5/1 M twelve.6~28.8 3.five~eight six~sixty eight 1200~3800 152
R 10.eight~twenty five.2 three~seven seven~52 1400~3400 152
40HS-B fifteen 2/1.five M 32.4~72 9~twenty 6~fifty eight 1200~3200 184
R 25.2~fifty four 7~fifteen 5.5~41 1000~2600 178
50HS-C thirty three/2 M 39.6~86.4 11~24 12~sixty four 1300~2700 214
R 36~75.six ten~21 13~forty six 1300~2300 213
75HS-C 30 four/3 M 86.four~198 24~55 9~52 a thousand~2200 245
R 79.2~180 22~fifty 5~34.5 800~1800 245
100HS-D sixty six/4 M 162~360 forty~a hundred twelve~56 800~1550 365
R 144~324 forty~ninety 12~forty five 800~1350 365
150HS-E a hundred and twenty eight/six M 360~828 100~230 ten~sixty one five hundred~1140 510
R 324~720 ninety~two hundred seven~forty nine four hundred~1000 510
200MS-E one hundred twenty ten/8 M 666~1440 185~400 fourteen~60 600~1100 549
200HS-ST 560 ten/eight M 612~1368 one hundred seventy~380 11~sixty one 400~850 686
R 540~1188 one hundred fifty~330 12~50 four hundred~750 686
250HS-ST 560 twelve/ten M 936~1980 260~550 seven~sixty eight 300~800 762
R 720~1620 two hundred~450 7~forty five 300~650 762
300HS-TU 560 14/12 M 1260~2772 350~770 13~63 300~600 965
R 1152~2520 320~700 thirteen~forty four three hundred~five hundred 965
350HS-TU 1200 16/fourteen M 1368~3060 380~850 eleven~63 250~550 1067
450HS-TU 1200 20/eighteen M 2520~5400 seven hundred~1500 thirteen~fifty seven two hundred~four hundred 1370
25HHS-C 30 1.five/one M 16.2~34.two four.five~9.5 25~ninety two 1400~2200 330
50HHS-D 60 3/2 M 68.4~136.eight 19~38 twenty five~87 850~1400 457
75HHS-E 120 4/three M 126~252 35~70 twelve~97 600~1400 508
100HHS-E a hundred and twenty six/four M 324~720 ninety~200 thirty~118 600~a thousand 711
150HHS-S 560 8/6 M 468-1008 130~280 twenty~94 500~one thousand 711

For the material of donning components,
“M” = steel, extremely chromium alloy         “R” = anti-abrasive rubber

Get in touch with

Welcome to speak to us any time for specifics.
Your inquiry will get our prompt focus and response !

 

Lime Mud Small Solids Soft Particles Handling Slurry Pump