Liquid Ring Vacuum Concentration Pump

Liquid Ring Vacuum Concentration Pump

DESCRIPTION

2SK sequence two-phase liquid ring vacuum pumps can operate well like two sets of SK series h2o ring vacuum pump. Owing to SK collection vacuum pumps only reach the maximum vacuum of-700mmHg, to meet up with the high vacuum and the massive pumping velocity beneath large vacuum, China designed the 2SK sequence water ring vacuum pump in 80s in the 20th century. 

Edge

1. In contrast with SK water vacuum pump ,It gets large vacuum and pumping speed and so forth..

2. Basic construction and simple upkeep.

3. The largely operating medium is drinking water and minimal maintenance fees.

4.The pump is extensively use in several places and suction h2o vapor,flammable, explosive and a variety of gases include a modest sum of dust and liquid.

5. The pump can works in the severe condition
 

Characteristics

1. Series SK,2SK Drinking water Ring Vacuum Pumps can be used to exhaust ordinary gases as properly as condensable gases(such as water vapor). Because they have the features of isothermal compression, they can exhaust flammable and explosive gases. When the pump produced up of anti-corrosion material is chosen, it can be utilised for exhausting corrosive gases also.

 

two. Collection 2YK Liquid Ring Vacuum Pumps have the characteristics of increased vacuum and far better applicability. The diverse types of gases can be pumped with the chosen suitable functioning media. Therefore, they can be utilized in broader assortment.

 

3. The pumps operate easily with reduced sound and intake. The energy-saving is thirty p.c comparing with the Drinking water Jet and the Drinking water Vapor Jet Pumps.

Perform Idea

 

PARAMETER

Model Displacement
(m3/min)
Ultimate Pressure
hPa     Torr
Motor Energy
 (kW)
CZPT Speed
(rpm)
Water CZPT
(L/min)
Inlet&Outlet 
Proportions (mm)
Bodyweight
(kg)
SK-.5B .5 47     35 1.five 2900 eight 25 45
SK-.8 .8 forty seven     35 2.two 2900 10 40 60
SK-1.5 one.five 47     35 four 2900 15 40 seventy five
SK-3 3 80     60  5.five 1450 25 50 153
SK-six 6 80     60  eleven 1450 35 fifty 210
SK-12 12 80     60  22 980 70 a hundred 600
SK-12B twelve 80     60  18.five 980 sixty one hundred 450
SK-25 twenty five eighty     60  45 980 70 100 900
SK-thirty 30 eighty     60  55 980 75 100 1200
SK-forty two 42 eighty     60 seventy five 740 a hundred one hundred 1500
2SK-2B 2 40     30 five.5 1450 20 fifty 185
2YK-2B two 6.six    5 five.five 1450 20 fifty 185
2SK-3 3 40     thirty 7.5 1450 twenty five fifty 320
2YK-three 3 six.six    5 7.5 1450 25 fifty 320
2SK-6B 6 33     thirty 11 1450 35 50 370
2YK-6B six 6.six    5 11 1450 35 fifty 370
2SK-twelve twelve 33     twenty five 22 980 70 80 850
2YK-twelve twelve six.six    5 22 980 70 80 850
2SK-25 twenty five 33     25 55,forty five 980 60-one hundred ten a hundred 926

Application
It can be applied to the vacuum drying, vacuum degassing, vacuum concentration, vacuum evaporation, vacuum impregnation process in chemical, pharmaceutical, metallurgy, food, medicine, textile, papermaking, electrical industry ( electronic industrial field) and so on. It can compose a vacuum system together with Roots Vacuum Pump and atmospheric Jet pump to achieve high vacuum, high efficiency, low power consumption.

Regular Selection for Water(Liquid)Ring Vacuum Pump
one,Based on the vacuum value
(one)If the pump is operated for long time with the inlet pressure range between1.3×104~1×105Pa (between 100 and 760 Torr), please choose series SK Water Ring Vacuum Pump.
(two)If the pump is operated for long time with the inlet pressure range between5×103~1.3×104Pa(between40 and 100 Torr), please choose series 2SK Water Ring Vacuum Pump.
(three)If the pump is operated for long time with the inlet pressure range between1×103~1.3×104Pa(between8 and 100 Torr), please choose series 2YK Liquid Ring Vacuum Pump.

two,Working Media 
There are four principles to choose working media(i.e.ring liquids)
(one) Lower saturated steam pressure
(two) Lower viscosity
(three) Stable physical & chemical features no chemical reaction with the pumped gasno corrosion to the pump no pollution to the environment.
(four) Economy

      If the water is selected as the working medium, the very best temperature of source h2o should be decrease than or equivalent to 15 °C the highest 1 should not be greater than 40°C. While the transformer oil or other low viscosity and saturated vapor pressure industrial oils are as the operating media, the common provide temperature ought to not greater than 40°C and the operating media temperature inside of the pump chamber should not be greater than 60C, when the liquid with decrease boiling stage is picked as the functioning media underneath some specific situations, the cooling unit have to be geared up to great down the operating media in buy to guarantee that the max temperature is 30ºC-50ºC, decrease than the boiling level. For the shut circulated system of functioning media, the liquid storage device and cooler should be outfitted, and the gasoline-liquid separator should be set up at outlet. The mechanical seal must be utilized for dynamic seal of the shaft.

3,Choose the dynamic seal of the shaft:
Choose the packing seal in general occasion choose the mechanical seal when the pump is used in no leak occasion.

four,Choose the material of the part that the gas passed:

(one) For the non anti-corrosion pump, the shaft is made of forty five#steel or 40Cr, other areas are produced of forged Iron or brass

(2) For the anti-corrosion pump,the components that the fuel passed, need to be created of stainless steel 304 and 306, or other materials appropriate for the respectively corrosive gasoline, or the components should be set with anti-corrosion coating.
 

five, The motor should be selected based on pumping pressure.

If the pump is employed for vacuuming while transferring fuel, the stress of pump outlet exceeds the CZPT ambiance stress.

When the outlet strain exceeds .15MPa, the specific double-levels liquid ring compressor ought to be decided on and not the vacuum pump refitted. Tthe power of the outfitted motor should be increased clearly. And the special gasoline-liquid separator and vehicle-drain device should be geared up too.

When the outlet pressure is below .15MPa, it can use the vacuum pump refitted as compressor. The electricity of the geared up motor need to be increased appropriately.

six,Composition methods of the water ring vacuum pump system
The opening circulation system should be used if the working liquid in the outlet need not be circulated or partially circulated.
The closed circulation system should be used if the working liquid in the outlet must be circulated.


WE CAN Provide YOU

one. On-time Delivery, with More Choice 
2. Perfect CZPT Assist
three. CZPT Vacuum Solutions and Service 
4. Samples Offered
5.  Long CZPT Guarantee 
six. CZPT Reaction to Customers’ Comments in twelve hours 
 
DVE Support
Sea Port: HangZhou/ZheJiang , China
Standard: CE Mark, Spare Areas Of Higher Stage
Delivery: Typically according to our manufacturing unit production plan, but we can adhere to your first purchase time 
Warranty: If pump look high quality difficulties, free of charge replacements of spare elements will be offered inside of one particular year
 
Improvement VACUUM Products CO., LTD 
Add:HangZhou INDZONE, HangZhou, ZHangZhouG, CHINA Computer: 317106
TEL:-576-83598308 FAX:-576-83598309 

Liquid Ring Vacuum Concentration Pump